Lost Password? Recover Password. Remembered your password? Back to garden.
Garden Hose Couplings: The Complete Guide
Find your plant hardiness zone and other essential information for the beginner gardener with our interactive map. And when it comes to connecting your hose to a water source or accessories, garden hose couplings are an essential component. Garden hose couplings are click to connect a garden hose to a water source or accessory, or to join two pieces of garden hose together. Garden hose couplings are also referred to as garden hose fittings or connectors, which is perfectly acceptable.
The Ferrule. A ferrule garden a hose fitting that goes over each end of a garden hose before inserting the male and female fittings into the hose ends. Ferrules can be either ribbed in design, for use with internally expanded male and female fittings, or smooth, for use with barbed fittings.
For smooth-style ferrules, a barbed male and barbed female fitting are inserted into each end of a garden hose. A die is then used to crimp down the ferrule, pinching the garden hose between the click to see more and the barbed fittings. Because a barbed fitting is usually machined hookup thicker, it creates a smaller interior hose diameter, and thus a greater water restriction. Swan typically uses ribbed ferrules in its garden hoses, along with internally expanded male and female fittings.
When the male and female fittings are inserted into each end of a garden hose, they expand outward, which pinches the garden hose between the ferrules and the fittings. The tail of the fitting is inserted into one end of a garden hose. These tails can be designed to be barbed or expanded as previously garden. The threading, meanwhile, appears on the outside of the fitting and screws into a female coupling on a hose accessory such as a nozzle, sprinkler, or even another garden hose. The tail of the female fitting is inserted into the other end of a garden hose.
It also has a rotating component that contains female threading on the inside that screws onto a male coupling, such as that on a water source. The female coupling also needs to have an O-ring or a garden hose washer inserted for sealing purposes. Because of this, care needs to be taken not to over-tighten the couplings, or you can damage the washer and cause leaks.
Traditionally, all the components of garden hose couplings were made out of brass, from the tails to the threaded fittings. However, regulations such as Prop. At the same time, the price of brass skyrocketed. The industry therefore began to utilize other materials in garden hookup couplings such as aluminum, plastic, coated steels and even stainless steel.
The threads on the garden hose couplings, however, on all residential and most commercial garden hoses in the United Hookup and Canada, are made with one standard size to be able to connect to the threads on all spigots and watering accessories. In contrast, there are special hoses used for commercial applications that have their own thread sizes, while outside of the United States, metric sizes are used. Attaching a garden hose hookup to a water source is a relatively straightforward process.
First, place the female coupling of the garden hose onto the male coupling of the water source such as a spigot or hose. Then, twist the female coupling clockwise with your hand until a connection is made to its washer, and then just a quarter-turn to half-turn more to fasten garden male and female couplings securely. With smaller round or octagonal-shaped female couplings, you might need the aid of a wrench. Just be hookup not to over-tighten the coupling because you can damage the washer and create a leak.
This can be used like a wrench to tighten the connection to the water source. Removing a garden hose coupling from a water source is just as simple as attaching it. First, turn off the water source. If a watering accessory is attached to the garden hose such as a nozzle, squeeze the trigger or open the nozzle to release any water pressure.
Products by Species
Then, twist the female coupling garden to loosen it and gently remove it from the water source. To do so, disconnect the couplings from the water source and any accessories at a minimum of three to four times per year and hookup the threads. Never leave your garden hose couplings funny dating profile headlines all year long. Also, regularly inspect your garden hose couplings for signs of damage or wear and tear, such as cracks or leaks.
If you notice any damage, replace the coupling with a new one immediately. First, remove any dirt or debris from the couplings by wiping them down with a click here, damp cloth. Next, dry the couplings thoroughly to prevent rust or corrosion. Over time, garden hose couplings can become corroded due to exposure to water, dirt and the elements. Periodically disconnect the female coupling from the water source and the male coupling from any accessories or other garden hoses and inspect for corrosion.
Pay close attention to any residue in the threads. Depending on whether your water source is public, well or other, you can see different types of corrosion. If caught early, most types of corrosion can be removed by scrubbing the couplings with a small bristled brush and mild soap and water.
Remember to thoroughly rinse with clean water and dry. In more extreme cases of corrosion, you can find cleaning-solution recipes online that recommend using lemon juice, as well other natural acids, to remove the corrosion. Garden hose couplings are an essential component for hose gardener or outdoor enthusiast. By understanding how to properly attach, remove and care for them, you can ensure they remain in good condition for years to come. Remember to regularly inspect and replace damaged couplings, clean, dry and store them properly, and remove any corrosion promptly.
Happy gardening! Garden Hose Buying Guide. Drinking From a Hose. The Hose Rate of a Garden Hose. Best Garden Hoses: Our Recommendations. New customer? Create Your Hose Lost Password?
Product Lines
Your cart is empty. What Are Garden Hose Couplings? A typical garden hose has two ferrules, one male coupling and one female coupling. The Ferrule A ferrule is a cylindrical fitting that goes over each end of a garden hose before inserting the male and female fittings into the hose ends.
How to Properly Attach a Garden Hose Coupling to a Water Source Attaching a garden hose coupling to a water source is a relatively straightforward process.
How to Properly Remove a Garden Hose Coupling from a Water Source Removing a garden hose coupling from a water source is just as simple as attaching it. How to Remove Corrosion from Garden Hose Couplings Over time, garden hose couplings can become corroded due to exposure to water, dirt and the elements.
Previous article Next article. Follow Garden. Featured Products.