Positioning of the hoses

The hoses on the filter pump must be connected from low to high and from high to low. The hose coming from the lowest connection of the pool the outlet must be connected to this. The hose coming from the highest connection of the pool the inlet bust be connected to the lowest connection of the pump. This way you get the connections going from low to high and from high to low. This is necessary to make the pump work as well as possible.

The pump is not a self-sufficient pump and works on the pressure of the hookup in the pool. By connecting pump filter pump in this way the highest water pressure is created for the filter pump. Tip: Do not connect extra hoses to your pump.

This will increase the intex to and from the pool and requires more water pressure. This will reduce the performance of the pump. If the filter pump is placed above the water level, the pump cannot function properly. As mentioned earlier, the filter pump is not a self-sufficient pump and works on the water pressure of the pool.

Positioning of the pump

The water pressure is then no longer sufficient pool get the water pumped around. Please place the filter pump on the ground next to the pool. It will ten be lower than the water surface. For more instructions on installing your pump, please consult the great dating ideas manual.

How to install the Intex filter pump

Boats Air leakage Patching a small leak - Boats. Solar mat Low water flow Low water flow. Do you have a different question? Let us know! Connecting the Filter pump. Download the troublesheet.