A water supply hose is a hose used to connect a dryer with a faucet.

Bought a dryer with steam function. Should I even bother hooking up the water?

You can connect the hose easily steam using a Phillips driver. The connection method may differ depending on the type of water supply hose and the shape of the faucet. Please check them first. Press the push-switch of the water supply hose to separate the coupling device water the hose. Without using the coupling device, connect the water supply hose to the faucet whilst hookup the push-switch.

Your browser is out of date.

First, separate the coupling device of the this web page supply hose from the hose. If they are not separated, they may not be tightened completely and water steam leak after assembly. Turn the 4 screws on the coupling device anti-clockwise to loosen them adequately so that they fit the circumference of the faucet. If the faucet is too big, pull out the guide plate round white plastic before loosening the screws.

Fit the coupling device to the faucet.

Need immediate help?

At this time, insert it until the door gasket inside the coupling device is in contact with the faucet. Check the threads on the end of the water supply hose and the coupling device and turn the fitting clockwise to tighten the joint. When the door gasket is reached, turn 1 or 2 rounds more to tighten firmly against the seal. Without using the coupling device, check the threads on the end of the water supply hose https://telegram-web.online/beat-hook-up-apps.php the faucet and turn the fitting clockwise to tighten the joint.

After installation, be sure to turn on the faucet to check for water leaks. Water is supplied only during the Stem Dry cycle.

Trending Hot Deals

Connect the newly purchased extension water supply hose to the faucet after disconnecting the old water supply hose. Connect the end of the new water supply hose to the existing hose to complete the installation. Remove the existing water supply hose from the faucet.

Connect the newly purchased water supply extension hose to the faucet by referring to the One-Touch Type Water Supply Hose Connection above. Connect dryer end of the extension hookup to the existing hose using the intermediate coupling device connector of the water supply hose. Always connect the dryer to the cold water faucet.

Causes and Symptoms

After installation, make sure to turn on the faucet and check for water leaks. This guide was created for all models, so the images or content may be different from water product. Here are more tips Check if the faucet is a one-touch type, round type or screw type.

Check if the end of the water supply dryer to be connected to the faucet is a one touch-type general typeor a screw type.