Step 1: Extension Hoses

By Bats22 Follow. More by the author:. More About Bats22 ». I'm an apartment-dweller, and I managed to inherit a washing machine and dryer no more collecting quarters and trips to the laundromat--yay! But there are no hookups in my apartment boo! Https://telegram-web.online/dating-justin-bieber.php is my solution to this problem. Note that I never signed anything in my lease forbidding me to have a washing machine--you might want to check your own lease for details.

Connecting a Washing Machine to a Kitchen Sink

Also, my downstairs neighbors are cool with their dishes rattling when I do laundry. None of the hoses that came with the washer are long enough to reach the sink. The supply hose is female hose fitting both ends --I just cobbled one together out of plastic hose repair fittings and clear braided tubing all available from Home Depot. I secured it with a hose clamp.

This works fine with a corrugated drain hose; I'm not sure how well it source work with a smooth surfaced hose.

Another piece you need from Home Depot: a sink aerator thread to hose connection adapter piece at left on photo; aerator at right.

Why join the Bunnings Workshop community?

It's sold in the rack of small plumbing fittings along with washers, sink replacement parts, etc. I've found that hand-tightening hookup adaptor is about right--overtightening with a set of ChannelLocks makes the rubber washer squeeze sink of its correct washing, causing a leak. Adaptor gets connected to the faucet. Hose gets connected to the adaptor. Knee bone connected to the shin bone. The supply hose needs to be connected to the cold source connection.

Since the rinse cycle is usually cold, you need machine hook up to this machine to make it work. Note the hose cap on the unused hot side. This is actually important.

Washing machines that you can hook up to your sink

The solenoid valves have enough slop in them that there is some leakage out of this connection, even when you're just running the machine on cold. Yeah, I found this out the hard way.

You might notice the velcro ties holding the hose together like this. I considered it good insurance, to hookup the drain hose from flopping out of the sink mid-cycle. Make sure all the connections are tight; turn on the water to the temperature you want it.

Introduction: Connecting a Washing Machine to a Kitchen Sink

Fire it up, and do your laundry! Note that if you wanted to do washing cold rinse, you will have to change the faucet settings mid-cycle. When you disassemble the hoses, be sure you have a bucket around to drain them out.

The second use for the velcro ties is to keep the hoses in place, when the machine is not in use. Sink underwear!