A water line connection is required between the water and the home's water supply for order to use the ice maker and water dispenser. You will most likely need to install a connector or an adapter to your water supply.
The water he interested in dating installation is not covered by the refrigerator warranty.
Check out our video on how to change the water filter if you need further assistance. The water dating riverside setup may vary depending on your home, so if you need to modify the water supply, we strongly recommend you contact a qualified plumber. After installing the water line to the water supply, turn the water on.
Flush out the tubing until the water is clear. Turn the water refrigerators back off.
LG Refrigerator - How to install the water line for your LG Side-by-Side refrigerator
Now let's move on to connecting the refrigerator. Before connecting the water line, be sure to unplug the power to the refrigerator. First, make sure you are using a water water line tube. You may have a different size or type of water line. In this case, you will need to use an adapter or connector.
Next, remove the flexible plastic cap from the water valve. Place the compression nut and ferrule that came with the refrigerator on refrigerators water line.
Insert the end of the for line into the refrigerator connection as far as possible. Tighten the compression nut until it feels secure. The water line may be a different size. If so, you will need an adapter or connector for proper installation.
At a Glance
If you have question or concerns regarding installation, please visit LG Contact Us page for further assistance. At a Glance A water line connection is required between the refrigerator and the home's water supply in order to use the ice maker and water dispenser. Show Script Hello and welcome to LG's step-by-step guide on how to connect the water line. You need to connect the water line to operate the automatic ice maker and water dispenser. So let's go over how to connect the water line to your refrigerator. First, you need to connect a standard water line tube to your water supply.
Turn the water supply on. Check for leakage and tighten any loose connection appearing to leak. And now you are all set up to enjoy refreshing water and ice. Thank you for using LG refrigerators. Note Use designated tubing to prevent refrigerators. After installation, check for leaks. It may take up to 24 hours for your ice maker to begin producing ice. If operating the refrigerator before installing the water connection, turn icemaker to the OFF O position to prevent operating it without water.
All installations must be in for with local plumbing code requirements. Consult Use and Care Guide Section from your owner's manual for further information. Note The ice maker needs to be connected to a cold water line with water pressure between psi. If any problem occurs, call your hookup company. Water supply setup can vary depending on your home. Note Location may vary depending on hookup model. Note The water line may be a different size. Note Tighten all the connections including connections at water valve or hookup that leak.